Happymodel 2024 Mobula6 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4G ExpressLRS Receiver 5.8G Openvtx: Receiver >> ELRS 2.4GHz>>:
Happymodel 2024 Mobula6 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4G ExpressLRS Receiver 5.8G Openvtx
$184.60
Price: 184.6 AUD
Weight (kg): 0.02
Receiver: ELRS 2.4GHz
:
:
Note: When placing your order during the checkout, please mention in the comments section any product options that are available for your product that you have selected otherwise the default product will be delivered, if your note sure please contact us, before you place your order so we can assist with selecting the right product for you, once your order has been placed theirs nothing we can do.
Receiver ELRS 2.4GHz
Features:
– AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
– Super light 1S 65mm Brushless whoop only 17.7g
– Equipment with the lightest brushless motors-SE0702 only 1.46gram
– FX17-B 1/3 CMOS 800TVL Camera awesome footage
– Smooth and powerful
– Compatible for 1S Lipo/LIHV
Specifications:
Brand: Happymodel
Model: 2024 Mobula6 1S
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81x81x37mm
Weight: 17.7g
Spare parts specifications:
Motor | Mode: SE0702 KV28000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
Propellers | Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm |
Flight controller | SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 |
Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 |
Onboard Serial ExpressLRS receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx |
Onboard 5.8G VTX | Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
FX17-B Camera | Model:FX17-B Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL FOV 150° Signal System: NTSC Net Weight: 1.5g Dimensions: L14mm*W14mm*H13mm |
Package includes:
Item Name | Qty |
Mobula6 2024 1S 65mm whoop Drone Frame +Canopy | 1 |
SuperX ELRS AIO 5-IN-1 Flight controller | 1 |
SE0702 KV28000 brushless motor | 4 |
Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw) | 1 |
FX17-B 1/3 CMOS 800TVL camera NTSC 4:3 | 1 |
Onboard 5.8G 25mw~400mw VTX | 1 |
Spare canopy | 1 |
Propeller disassemble tool | 1 |
Screw driver | 1 |
Stock: 81
Note: Depending on stock levels, your Item will be delivered via either one of the following warehouses: China warehouse (CN), Australia warehouse (AU)
Specification: Happymodel 2024 Mobula6 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4G ExpressLRS Receiver 5.8G Openvtx: Receiver >> ELRS 2.4GHz>>:
Weight | 0.02 kg |
---|
User Reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.